Post new topic   Reply to topic    Exup1000.co.uk Forum Index -> Workshop
View previous topic :: View next topic  
Author Message
two-stroke-brit
Scooter Boy
Scooter Boy
Joined: 25 Jan 2018
Posts: 72
Location: TEXAS USA
PostPosted: Sun Sep 30, 2018 9:47 pm    Post subject: brakes are giving me fits Reply with quote

Hi All, simple one first .
#1 i need to replace the micro switch in the front brake lever assembly.
where do i get one from.

#2 and i rebuilt the rear master cylinder now i have a hard pedal but almost zero movement ,its like a one way valve is not letting the fluid return.
i put the new seals in as the old ones came out .
the one on top of the spring has a dimple so its in correct for sure .
anyone have a pic of the valve with the seal fitted correctly.
thanks mark
_________________
IT MAY BE ROUGH LOOKING BUT ITS A FUN RIDE
Back to top
View user's profile Send private message
nuggitt
Moderator
Moderator
Joined: 22 May 2009
Posts: 5071
Location: North Yorkshire
PostPosted: Mon Oct 01, 2018 7:18 am    Post subject: Reply with quote

In answer to you first question. I've had one of these fitted to my bike for the last year and it's still working fine.

BRAKE SWITCH

Be careful not to overtighten the fixing screw.
_________________
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Back to top
View user's profile Send private message Send e-mail
two-stroke-brit
Scooter Boy
Scooter Boy
Joined: 25 Jan 2018
Posts: 72
Location: TEXAS USA
PostPosted: Mon Oct 01, 2018 11:11 am    Post subject: Reply with quote

thanks nuggitt for the link .
i will chase one down.

and on the second issue on closer inspection i see a tiny hole in the supply side that i suspect is the return circuit to bleed back the fluid.
i have poked a wire bristle through to make sure its clear.

thanks mark
_________________
IT MAY BE ROUGH LOOKING BUT ITS A FUN RIDE
Back to top
View user's profile Send private message
nuggitt
Moderator
Moderator
Joined: 22 May 2009
Posts: 5071
Location: North Yorkshire
PostPosted: Mon Oct 01, 2018 11:19 am    Post subject: Reply with quote

You could give it all a good spray with brake cleaner just to make sure there's no crap blocking the holes. nod
_________________
Bit of advice. Buy a good bed and a good pair of shoes, because if you aren't in one you'll be in the other.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Exup1000.co.uk Forum Index -> Workshop All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.exup1000.co.uk is owned and run by EXUP enthusiasts, for EXUP enthusiasts
Powered by phpBB © 2001, 2002 phpBB Group